Mount Rome Decumanus M1 QD 30 mm High Weaver/Picatinny

The Rome Decumanus M1 QD 30 mm High Weaver/Picatinny mount is manufactured from a single piece of black anodized aluminum with a matte, wear-resistant finish. The material is impact-resistant and the monolithic construction gives you a sturdy base for mounting a riflescope. Thanks to the Quick Detach base, you can quickly and easily secure the mount on the rail.

An integrated spirit level is built into the front, which is always visible to the shooter. With this you can check at a glance whether the mount sits straight on the Weaver/Picatinny scope rail and adjust it directly if needed. In the center of the mount there is a slot for a shim, with which you position the riflescope precisely aligned with the mount.

For fastening, the mount has four screws to secure it to the scope rail, plus twelve screws for the riflescope — six per mounting ring. Each screw is marked with a number indicating the tightening order. The six screws per ring ensure even pressure distribution, so the riflescope stays in place properly and stably. A common choice for sport shooters who value a repeatable zero.

On top of the mounting rings and on the right side of the monobloc are multiple connections, marked with letters. These are intended for mounting additional accessories, allowing you to further customize the rifle to your needs.