Sound Suppressor Eagle Vision Triton-50 Interchangeable 1/2 UNF

The Eagle Vision Triton-50 Interchangeable ½ UNF sound suppressor is suitable for multiple calibres thanks to an interchangeable system of liners and end caps. The interior is lined with felt for maximum sound suppression at the muzzle. All main components — with the exception of the air strippers, which are made of steel — are CNC machined from impact-resistant aluminium. This guarantees tight tolerances and solid construction. A black anodised finish provides good corrosion resistance.

The heart of the set is the suppressor itself, equipped with threads on the front and rear: M18x1 on the front and M23x1 on the rear. You insert the liners into the suppressor from the rear. O-rings around the liners provide the seal — this makes installation deliberately somewhat tight. Once the correct liner is in place, you lock it at the front with one of the supplied air strippers and at the rear with the end cap adapter. This adapter has ½x20 UNF threads on the other side, which allows you to screw the Triton-50 directly onto the ½ UNF threads of your rifle's muzzle.

The set contains liners and air strippers for the following calibres:
• .177
• .22
• .25
• .30
For .30 calibre there is no liner in the set — the suppressor is used without a liner for this calibre, but a matching air stripper is included. The air strippers sit recessed in the suppressor after tightening. To tighten or loosen them securely, use the supplied steel pins: insert these into the holes on the front of the air stripper and use the supplied allen key as a lever. In addition, a separate tool is included with the Eagle Vision Triton-50 Interchangeable ½ UNF sound suppressor with which you can also install and remove the air strippers.

All components are supplied in a compact, sorted case with a zip closure — convenient for storage and transport.