Digital Torque Screwdriver Wheeler FAT Wrench

Screws that are too loose or too tight quickly cause problems. With the Wheeler FAT Wrench digital torque screwdriver, you tighten every screw with exactly the same force and eliminate that risk. Setting is done via the buttons and LCD screen on the underside: you choose a value between 5 and 100 inch pounds (0.6 Nm to 11.29 Nm). Once you reach the set torque, you see and hear it. A handy basic tool kit for anyone who installs optics and components themselves.

This Wheeler comes with a set of ten bits, so you can use it on a variety of screws. Each one is made from shock-resistant S2 tool steel, hardened to a hardness of 56-58 Rockwell C. Which bits you get:
• Allen bit: 3/32, 7/64, 5/32 inch
• Flathead bit: #10, #11, #32
• Torx bit: T15, T20
• Adapter bit
• Leupold/Buehler bit
The magnetic shaft ensures that a bit goes in easily and then stays firmly in place. Both the shaft and bits are coated with phosphate coating against rust, which greatly extends their lifespan. Holding is comfortable and with good grip thanks to the rubber coating around the handle.