Chassis MDT ACC Premier Gen2 - Tikka T3/T3x SA - FDE

Want to significantly upgrade your Tikka T3 or T3x SA? Then this MDT ACC Premier Gen2 chassis in FDE offers an almost complete solution, suitable for both shorter and longer rifle barrels. You can mount a large amount of accessories on it and adjust the system completely to your own preferences.

The main difference from the Premier Gen1 is the forend: with the Gen2 it's shortened to 381 mm (15 inch). This makes this chassis particularly suitable for shorter barrels and works with rifles from a barrel length of 432 mm (17 inch). Both rimfire and centerfire rifles are thus eligible. Below we list the other strong points.

6061 aluminium was chosen as the base material, good for high structural rigidity. A V-block bedding is of course included; it keeps the action extremely stable in place with minimal movement during firing — crucial for shot accuracy.

The shorter forend is also wider, flatter and thicker. If you shoot from a barricade, you have a particularly solid platform as a result. The extra high integrated barricade stop increases that stability and at the same time protects the magazine. Via the M-LOK slots on the bottom and sides you mount counterweights for even more stability, and of course you also place a bipod or tripod on it.

On the top of the forend you'll find a row of holes along the length, intended for example for an accessory rail or control bridge. This provides additional mounting options and immediately limits the mirage that a hot barrel can cause.

A recess in front of the magazine inlet allows you to easily access the magazine release. The magazine catch is also ambidextrous, so both left- and right-handed shooters can handle it easily.

The chassis comes with an MDT SRS-X Lite stock, pleasantly light in weight. You adjust the LOP (length of pull) with spacers, and the adjustable cheek rest helps you keep your eye consistently aligned with the scope. At the bottom of the stock there's another M-LOK slot, handy for example for extra weight.

The whole package is completed with the MDT Vertical Grip – Premier. It gives your hand a comfortable, ergonomic position relative to the trigger, providing a more natural stance and greater stability — and thus better shots. You slide the side panels of the grip forward and backward and also adjust the angle of the grip, so every shooter finds the right fit.

Assembly is simple: you place the action in the chassis and secure it with two screws. Without the intervention of a gunsmith, you've equipped your rifle with this upgrade in no time.

MDT ACC Premier Gen2 – Tikka T3/T3x SA – FDE chassis features:

• Suitable for action: Tikka T3/T3x SA
• Anodized 6061 aluminium
• Equipped with ceramic coating
• V-block bedding
• Forend with a length of 38.1 cm (15 inch)
• Arca rail over the full length on the underside of the forend
• M-LOK slots on the bottom and sides
• Mounting points on the top of the forend
• M-LOK slot at the bottom of the stock
• Integrated barricade stop
• Integrated thumb rest
• Ambidextrous magazine catch
• Easily accessible magazine release
• Adjustable in LOP
• Adjustable cheek rest
• Adjustable vertical grip
• QD attachment points for a sling
• Quick and easy to install
• Color: tan