Plate Carrier Cuirass FAST Elite XL

M-TAC PLATE CARRIER CUIRASS FAST ELITE XL is a new evolutionary stage of individual armor protection in the PLATE CARRIER line. Compatible with standard ESAPI (USA) Extra Large (35.5 x 28 cm) with chamfered upper corners.Also, with the help of internal straps, the plate carrier can be adjusted to suit a Large plate (33.7 x 26 cm). The main feature of the ELITE model that distinguishes it from previous generations is the quick-reset fasteners from Duraflex, which are located on the cummerbund. These premium fittings combine a simplified fastening/unfastening system with light weight and high strength. In order to fasten, place the part attached to the cummerbund into the clip on the front part of the plate holder and pull until click is heard. In order to disconnect it, you just pull the toggle sharply up or down, towards yourself. The system works the same on both the left and the right-hand side. The M-TAC CUIRASS ELITE PLATE CARRIER is made of high-quality Cordura 500D - a super-durable fabric, resistant to abrasion and high loads. On the inside of the plate carrier there are 3D mesh inserts that provide cushioning and air circulation. The ergonomic shoulder straps are comfortable to use and organically follow the contours of the body. The rib-like form of the cummerbund significantly reduces the weight of the product and allows you to attach pouches, if required. The front features a slotted Velcro panel that can be used to attach MOLLE-compatible gear and ID tags. At the top of the plate holder, the designers have provided a small compartment with a moisture-proof AquaGuard zipper. This pocket is designed to store small flat items such as IDs, keys, a lighter, etc. At the bottom of the body armor there is a quick-release module with 3 pouches that can securely hold magazines. To avoid accidental ripping from the Velcro base, it is also attached to webbing straps on the plate carrier with Woojin carabiners. On the back there is a classic MOLLE interface and a handle for evacuation which, when extended, is secured to the back with Velcro panels. Material: Cordura 500D; Fasteners: Duraflex; Suitable for: standard ESAPI Extra Large (35.5 x 28 cm) and Large (33.7 x 26 cm) with chamfered upper corners. Due to its unique qualities Cordura is widely used in tactical equipment of military, law enforcement and special forces. It is mainly materials with linear density of 1000d and 500d. Linear density - is the ratio of weight of the thread of matter and its length. It is measured in denier. This unit of measurement is mainly used for nylon products. Accordingly, the higher this value, the thicker and heavier the fabric. The physical and technical characteristics of CORDURA 1000D fabric are very high, breaking load is about 3000 N, breaking load is about 150 N. The abrasion resistance is over 50,000 cycles. It is used for clothes, covers, pouches. Be it a tactical backpack, pouches or jacket.Products made of CORDURA materials will undoubtedly pass the test of time and distance. CORDURA is durability, reliability and style. In terms of strength, it is beyond any competition. Woojin plastic® - is a world renowned company for the production of quality plastic fittings. Woojin plastic® - is a Korean company founded in 1979. The company's headquarters were in Korea until 1993, after which it moved to the United States. Since then, the company has grown even faster. Thus, in two years, the company's exports grew to 1 million dollars and continued to grow. In 2002, the company obtained international ISO 9001 certification. Today Woojin is one of the world's best manufacturers of plastic fittings for the military, climbers and alpinists. Very important components in the creation of Woojin plastic is ACETAL. It gives the material such qualities as: hydrophobicity, wear resistance, strength, rigidity and form stability. Distinctive feature in comparison with other materials is also its dimensional stability, so all components made of ACETAL are identical. ACETAL is also not replaceable in humid environments; its quality is not a bit worse compared to polyamide. YKK company is the world leader in production of zippers. It manufactures 90% of all such zippers in 71 factories around the world. This is a group of Japanese companies whose trademark was registered almost 70 years ago. YKK is deciphered and translated from Japanese as "Yoshida Factory" - the name of the company's founder, who opened the production of clothing clasps in the 1930s. Success was achieved through cooperation with leading clothing brands and the introduction of particularly strict quality standards. In addition, for a very long time the machine for the production of quality clasps kept a strict secret. This helped the company to quickly circumvent its main competitors. Camouflage "MULTICAM" was developed by the American company Crye Precision in collaboration with the U.S. Army Soldier Systems Center, commonly known as the U.S. Army Natick Labs. Creating the MULTICAM pattern took over eight years of expeditions, scientific research, data analysis, and practical field tests. It was designed to serve as a universal camouflage solution for the American army. The need for a new camouflage became evident after Operation Desert Storm in Iraq. At the time, the camouflage patterns in use, such as Woodland for forest terrain and Tri-Color Desert for desert operations, failed to provide adequate concealment for soldiers. Each operation still required specialized camouflage, complicating supply logistics and decreasing soldier safety. Even after introducing a new universal digital camouflage (Digital) during operations in Afghanistan and Iraq, the situation did not significantly improve. It became clear that a single universal pattern was necessary, one that would allow a soldier to blend into any terrain and at any distance from an observer. The goal was to create camouflage that worked equally well against various backgrounds, including vegetation, desert, rocky terrain, urban buildings, and ruins, under different lighting conditions and in any climate throughout the year. How does this camouflage work? It seemed almost impossible to achieve such a versatile pattern. However, the designers utilized the limitations of human vision and the structure of our eyes to their advantage. In theory, for camouflage to be effective at long distances, it should consist of large, blurred spots. At closer ranges, especially against backgrounds of foliage and vegetation where the human eye detects small objects more clearly, the pattern should incorporate small, rounded elements of the dominant background. The developers found that the predominant backgrounds across most regions of the globe share similar gradients of green and brown. An important revelation was that black, which is commonly used in camouflage patterns worldwide, does not actually appear in nature. By integrating their findings and conducting computer simulations that layered over a thousand images, the developers successfully created the MULTICAM pattern. Near Infrared (NIR) technology is utilized by the US Department of Defense to minimize detection by NIR electro-optical sensors. These sensors do not detect infrared radiation. NIR uniforms are made from a special fabric that helps soldiers maintain a temperature similar to that of the surrounding landscape, making them harder to spot. Additionally, NIR technology reduces light reflection, making the uniforms less visible in low-light conditions